HI-TEK COATINGS & SUPERIOR PRODUCTS

PRODUCT:

DESCRIPTION:

APPLICATION:

CERTIFICATIONS:

Field Test Results for Supertherm

Water based formula designed with 4 separate ceramics: two are reflective, one acts as a dead air space between the coating surface and substrate, and one blocks 99.5% infrared radiation.  Urethane resin binds all other resins and ceramics and provides a vapor barrier in the dry film.  Dries: 4 hours, Cures: 14 days.

Manufacturer Guarantee 10 years

Waterproof. Reflects Sun Radiation, Retards Heat conduction.  Mold resistant.  30 minute fire resistance.  R-19 Insulation Equivalent.  Reduces Energy Expenses.  Provides 68% sound reduction.

BOCA 21-25 Approved Insulation Value RE-19

ASTM Class A

Energy Star Partner

USDA Approved

VOC Approved

NASA 8060 1B/C Test 1

US Consumer Product Safety Commission - Non Hazardous

NFPA 255

DNV - Det Norske Veritas (Maritime Use Approval)

• Roofing (wood, metal, concrete, stucco, tar, rubber or asphalt)
• Interior Walls / Exterior Walls
• Water Storage Tanks - Oil & Gas Storage Tanks
• Refrigeration Units
• Pool/Spa Decking
• HVAC Equipment & Ductwork
• Hot Pipes
• Clothes Dryers

Water based Elastomeric acrylic resin with ceramics for toughness.  Contains 60% solids to fill cracks and stop water leakage.  Dries: 4 hours, Cures: 10 days

UV Resistant.  Outstanding adhesion, sealing protection and flexibility.  Withstands ponding water.  Used as a base coat for Super Therm.

USDA Approved

VOC Approved (Volatile Organic Compounds)

• Roofing: flat, inclined, New Construction or Retrofit
• Wood, concrete, tar sheeting, polyfoam or sheetrock.

"Liquid Reinforced Coating"
Biohazard Encapsulation (Patent# 5,695,812) 

Existing Rust / Lead-Based Paint Encapsulation

Railway Bridge Application

CORROSION & BIOHAZARD ENCAPSULATOR

A one part, deep penetrating product.  Patented to encapsulate asbestos, lead based paint & existing unprepared rust. Moisture cures.  Dries in 2-4 hours.

Primer and Top Coat in one product.

20-30 year life expectancy.

Impervious to UV& Infrared Rays, acids, chemicals, salt spray, impact & abrasion.  Excellent adherence to wood, concrete, fiberglass and other substrates.  Minimum surface preparations.  No need to sandblast.  Cures to 6750 PSI Tensil Strength.

ASTM D3359 1795

USDA Approved

VOC Approved (Volatile Organic Compounds)

EPA

DNV - Det Norske Veritas (Maritime Use Approval)

SALT SPRAY: 2000 hours

• Metal roofing
• Metal handrails - posts & fencing
• Window frames and doors.
• Storage tanks / Water tanks / Underground tanks
• Iron pipes. Bridges / Docks
• Anywhere corrosion exists
• Asbestos & Lead Paint Encapsulation

(For Wet Surfaces)

2 Component solvent based Epoxy coating.  Chemical / Solvent resistant.  Dries: 10 hrs, cures 10 days

Adheres to carbon steel, wood & concrete.  Apply to damp or moist substrates without loss of adhesion.  Can be color tinted. Glossy finish.  For external use overcoat with SUPERTHERM or ENAMO GRIP.

ASTM B117 Salt Spray Corrosion Test

ASTM D1654

AWWA D102 78 sec 3.2 (American Water Works Association)  Approved for potable water usage.

VOC Approved

EPA Approved

• Cooling Tower Pans
• Pipes
• Any surface that needs corrosion control but cannot be dried for application.
• AC Condensate Drain Pans

2 Component, solvent based Epoxy coating.  Contains 49% solid pigment.  Self-priming.  Impact resistant.  Semi gloss finish, can be tinted any color.

Chemical, Solvent, Static and Fire resistant.  Outstanding water and humidity control.  Adheres tenaciously to concrete, can be utilized in masonry applications.

VOC Approved

ASTM B117 Salt Spray Corrosion Test

AWWA D102 78 Sec 3.2 Approved for potable water usage.

• Swimming pools (Indoors)
• Concrete block walls
• Warehouse flooring
• Fountains & Ponds (Indoors)

Clear water based penetrating sealant that chemically reacts with alkali & lime in concrete and forms a gel that purges impurities, waterproofs and preserves concrete from the inside out.  Contains additives for mold and mildew inhibition.  Dries: 2 hours on new concrete

Permanently waterproofs and seals concrete from the inside, purging oils & foreign matter out of concrete,  Mold & mildew, Oil, Acid & Solvent resistant.  Stops wall sweating & bleeding.  Prevents floor-covering failure.

USDA Approved

VOC Approved

• Concrete flooring, walls blocks, pipes or other concrete substrates
• Stucco, brick, terrazzo, cement block, walls or floors
• Carports - Storage warehouses - Mechanical areas

2-Part epoxy coating that has the same ceramics as Supertherm and the same insulating capabilities.

Adheres to carbon steel, wood & concrete.  Insulation effectiveness equal to 4 - 6 inches of batt insulation.  Helps maintain water temperature in pools.

VOC Approved

ASTM B117 Salt Spray Corrosion Test

ASTM D1654

AWWA D102 78 Sec 3.2 Approved for potable water usage.

• Swimming pools, holds heat inside pool (Outdoors)
• Concrete dams or Canal locks
• Basement walls - to repair, seal and insulate
• Ponds & Fountains (outdoors)

(Ceramics can be added for non slip surfaces)

NON SKID I

NON SKID II

Tough, medium speed, chemically curing two-component polyurethane enamel.  Resistant to stains, chemicals and solvents.  Scuff, mar and impact resistant.  Resistant to weather, water and humidity.  UV resistant.  Self-leveling formula gives a smooth finished surface appearance.

With non-skid element added, surface looks glossy, but is not slippery.  Non Skid I contains smooth silicon sand, Non Skid II uses hard quartz aggregate.

Used as a topcoat or alone as a finish coat.  Resistant to industrial pollutants, smog, acid rain, UV & hail.  Protects from rust & corrosion for min. 10 years.  Can be color tinted.  Unsurpassed gloss & color retention.  Flat, high gloss & gloss finished available.  Bonds to metal, masonry, wood, stone, concrete & porous surfaces.  Graffiti Proof (With Graffiti Cleaner - Spray on - wash off with water on clear high gloss finish).  Can add aggregate for non-slip finish.

USDA Approved

VOC Approved

• Swimming Pool Decking
• Stairs, Walkways, Landings, Bridges
• Service Hallways - Laundry & kitchen areas
• Boat Docks, Boat Decks
• Mechanical Room Floors, Loading Docks

(Non Skid)

Water based, 2 component, amine cured, Epoxy coating.  Ceramic particles can be added for slip resistance.  Penetrates concrete substrate to produce a water & chemical resistant surface.

No solvent odors / Non Flammable

Provides slip resistance even when inclined and wet.  Stops dust & residue formation on concrete.  Resistant to acids, solvents, oil and gasoline.  Impact, abrasion and scuff resistant.  Gloss finish, can be tinted to custom color.

AWWA D102 78 Sec 3.2 Approved for potable water usage.

VOC Approved

• Concrete Floors & hallways
• Service Area Floors
• Stairs, Landings & Walkways

Latex insecticide coating controls insects for up to 2 years.  Odorless, low toxicity and non-flammable

15 Gallon container.  Commercial / Industrial use ONLY.  Exterior applications only.

Use as a barrier to treat insect pathways and entry routes.  Continuous insect control for 2 years resulting in reduced cost of labor & materials.  Low risk of contamination.  No Odors.

EPA #64769 45600 1 (Clear)

      #64769-45600-11 (Spray)

USDA Approved

FDA/State Agency Approval

• Food Processing Areas, Food Storage Areas
• Exterior Food Service Areas
• Exterior Restroom
• Window and Doorframes
• Foundations & Overhangs

FIRE PROTECTION COATINGS - HOT SURFACE COATINGS

FIRE PROTECTION COATING

Water based formula containing 8 ceramic compounds.  Forms a heat block against extreme heat migration.  Flexible to withstand severe climate changes & heat peaks.  Can be used as a high temperature heat insulator.

Dries: 8 hours (touch); 12 hours to overcoat

Cures: 21 days

Resistant to corrosion, fungus & mildew.  Adheres directly to metal, concrete, stucco, plasterboard, wood, fiberglass, plastics & composites for fire retardance.  Stays intact above 2000F degrees.  400 dry mils provides 2-3 hours of fire rating on structural steel.

UL1709: *FET=2 hr / 400 mils

ASTME119: FET=3 hr / 400 mils

E84 Flame Spread = Class A

USDA Approved

*FET = Fire Endurance Test

• Fire Protection in Furnace and Boiler Rooms
• Approved for coating Structural Steel
• Anywhere Fire Protection is needed and reconstruction is not practical

• Excellent for covering extremely hot surfaces (800F)
• Wall & ceiling application inside a building
• Hot surfaces (Safer handling & maintains cooler interior temp.)
• Pipelines (can be applied over foam or wrap insulation)